Virtual Router/ Firewall/ VPN

Reply
Regular Visitor
Posts: 1
Registered: ‎08-03-2017

ipsec Remote access L2tp connection - not able to access from client to remote server vyatta

Hi ,

 

I have configured L2tp / ipsec Remote access VPN on vyatta5400 router , I am able to establish l2tp connection and client user can be seen conneted on vpn status , however I am unable to ping or ssh from client window7 host ip 192.168.100.101 ( asigned after connecting to remote access vpn ) to reach destination ip 10.170.114.22 ,

I am able to ping remote-address x.x.x.x .

 

Strange thing is server 10.170.114.22 i log in and can ing 192.168.100.101 but vice versa is not happening .

Is remote-nexthop command required , i have added it and name server also .

 

what could be the issue to look into , any chnges at client host ip  192.168.100.101 to be made ?

 

exact similar config done . no firewall port is blocked .

set vpn ipsec ipsec-interfaces interface <OUTSIDE PUBLIC INT>
set vpn ipsec nat-traversal enable
set vpn ipsec nat-networks allowed-network 0.0.0.0/0

set vpn l2tp remote-access outside-address <OUTSIDE PUBLIC IP>
set vpn l2tp remote-access client-ip-pool start <x.x.x.x>
set vpn l2tp remote-access client-ip-pool stop <x.x.x.x>

set vpn l2tp remote-access ipsec-settings authentication mode pre-shared-secret
set vpn l2tp remote-access ipsec-settings authentication pre-shared-secret <passphrase>
set vpn l2tp remote-access authentication mode local

set vpn l2tp remote-access authentication local-users username test password abc123

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.