09-02-2014 07:40 PM
I'm learning to configure vRouter , there is a question I didn't figure it out.
My gw's IP is 192.168.0.65/26 with netmask 255.255.255.192 and host IP is 192.168.0.68 with VMware Workstation 10
I set up a VMM with eth0 use bridge mode use 192.168.0.77/26 and eth2 to eth4 working under NAT.
when I try to set up static route on eth0 there always got a error
#set protocols static route 192.168.0.77/26 next-hop 192.168.0.64 or 65
Prefix not on a natural network boundary. Did you mean 192.168.0.64?
Value validation failed
Could someone tell me whats wrong with my configure