04-15-2017 11:39 AM
My lab is on VMware Workstation 12 Pro:
- vrouter 5600 v17.1.0 with 1xnic to Internet, 2xnics to Internal lan on Bond
- Win 7 with 1xnic to Internal lan, firewall disabled
Ping between Win and 5600 work fine without bond. Once I commit bond the ping doesn´t work.
The strange case is that the same configuration worksfine on vrouter 5600 v6.5R1.
admin@vyatta2# run show version
Description: Brocade Vyatta Network OS 5600 17.1.0
admin@vyatta2# run show interfaces bonding dp1bond1
dp1bond1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
link/ether 00:0c:29:da:f4:fe brd ff:ff:ff:ff:ff:ff
inet 184.108.40.206/24 brd 220.127.116.11 scope global dp1bond1
valid_lft forever preferred_lft forever
Description: bonding de la red Interna 20.20.20.x
RX: bytes packets errors ignored overrun mcast
0 0 0 0 0 0
TX: bytes packets errors dropped carrier collisions
0 0 0 0 0 0
Has anyone try to config bond in vSphere 5.5/6?
Thanks to all
04-27-2017 02:08 PM
I spoke with a TAC representative regarding your post and this was their response:
"There is no vrouter 5600 v6.5R1. Which version is working fine, exactly?
The bonding interface is showing as DOWN, but what is the status of the individual links? Can we get your interface configuration?"
If you can respond to the questions above, we'll be closer to resolving your issue for you.
Brocade Community Team