Virtual Router/ Firewall/ VPN

Reply
Regular Visitor
Posts: 1
Registered: ‎03-08-2016

BGP prefix announcements don't work

[ Edited ]

Hello all,

 

I' m new to brocade tech and to vyatta.

 

0) My version is: 

 

Version: VSE6.7R9
Description: Brocade Vyatta 5415 vRouter 6.7 R9

 

 

1) My BGP conf is:

 

protocols {
bgp 64512 {
neighbor 100.127.127.0 {
**filtered**-interval 10
ebgp-multihop "5 "
nexthop-self
prefix-list {
export EXPORT-JASPER
}
remote-as 36180
soft-reconfiguration {
inbound
}
timers {
holdtime 7
keepalive "21 "
}
update-source "vti0 "
}
network 10.148.191.0/26 {
}
redistribute {
connected {
}

 

2)

 

VTI conf is:

 

vti vti0 {
address 100.127.127.1/31

 

3) 

 

interfaces {
bonding bond0 {
address 10.148.176.159/26
hash-policy layer3+4
mode 802.3ad
vif 1664 {
address 10.148.191.1/26

 

the network annunced is only virtual. I don't have any real ip address plugged unless the VIF 1664.

 

The announcements from my neighbur work, but i'm not able to send out mine.

 

4) 

 

policy {
prefix-list EXPORT-JASPER {
rule 10 {
action permit
description "my prefix to jasper"
prefix 0.0.0.0/0
}
}
route-map map-out-jasper {
description "IPv4 routes to export to Jasper - BGP"
rule 10 {
action permit
match {
ip {
address {
prefix-list EXPORT-JASPER
}

 

 

PS: on thr other side there is a Cisco router.

 

THank you for help.

 

 

 

Brocadian
Posts: 44
Registered: ‎02-09-2015

Re: BGP prefix announcements don't work

For your VTI the subnet should be /30 or /32, /31 doesn't work well.

 

Have you tried a prefix with networks other than 0.0.0.0/0?

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

Click to Register
Download FREE NVMe eBook