For more details, please see ourCookie Policy.


SAN Health Utility

Reply
Occasional Contributor
Posts: 8
Registered: ‎10-24-2014
Accepted Solution

SAN health /autostart doens't work

Hello,

 

I would like to setup SAN Health to run once a month.

I found in Brocade forum that it's possible with task scheduler and with /autostart flag.

I treid to launch below command in "CMD" but the tool is loaded but the audit doesn't start.

"c:\SAN Helath Audits\DC_SAN.set" /autostart

I ran manually the audit and it's runing fine.

 

Can someoane help?

 

I tried with Win 7 and WIn 2012 R2 and same...

 

Moderator
Posts: 212
Registered: ‎07-21-2009

Re: SAN health /autostart doens't work

Hi Nordin,

Please see http://community.brocade.com/t5/SAN-Health-Utility/Using-SAN-Health-Setting-up-an-automated-monthly-weekly-daily/ta-p/3581?r2 for the details, specifically the screen shot of the New Action box. You'll need to call the SAN Health .EXE with "C:\Program Files\Brocade\SAN Health\SANHealth.exe". You can likley use one of the following in your CMD box:

 

"C:\Program Files\Brocade\SAN Health\SANHealth.exe" "C:\SAN Helath Audits\DC_SAN.set" /autostart

 

or

 

"C:\Program Files (x86)\Brocade\SAN Health\SANHealth.exe" "C:\SAN Helath Audits\DC_SAN.set" /autostart

 

BUT, after doing some testing here, it appears that this may be case-sensitive. If the extension is actually .SET, please use that or the process may not work. Please let us know the outcome.

Occasional Contributor
Posts: 8
Registered: ‎10-24-2014

Re: SAN health /autostart doens't work

Hello,

 

Thx. It was case sensitive issue.

Now it's working.

 

Thx.

Nordin.

New Contributor
Posts: 4
Registered: ‎01-16-2018

Re: SAN health /autostart doens't work

hi ,

i am also trying to do the same task which you have achieved ,but i dont know the format for the .SET file and how to create the .SET file .can you please help me on this or point me to correct resources which might help me in understanding the .SET file format and contents. 

 

thanks.

Moderator
Posts: 212
Registered: ‎07-21-2009

Re: SAN health /autostart doens't work

Hi aravindsmg,

A .SET file is the saved information that can be used to start a SAN Health audit. Please watch the short videos at https://community.brocade.com/t5/SAN-Health-Utility/SAN-Health-Online-Help/ta-p/3607 to get a good idea of how to use SAN Health.

 

Regards,

Health Admin

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.