For more details, please see ourCookie Policy.


Management Software

Reply
Contributor
Posts: 21
Registered: ‎02-01-2013

Firmware Management

Hello everyone,


I´m new user with Network Advisor and  i´m try to use "firmware management" but i cant (i attach the error). I cant access via web too.
Someone can help me with this?

Thanks

 

 

 

External Moderator
Posts: 5,436
Registered: ‎02-23-2004

Re: Firmware Management

@regadmin

 

I see, the VM have different IP 172.28 as the switch with IP 172.20

 

--->>> I cant access via web too.

 

most probable is web-management not configured

 

Telnet to the switch, at the prompt

 

ICX6430>enable - press enter -

 

ICX6430#conf term - press enter

 

ICX6430(config)#web-management ? - you see all operands -  and set wm to enable

 

about FW upgrade, I would suffest to use TFTP instead BNA.

 

 

 

 

 

 

 

TechHelp24
Contributor
Posts: 21
Registered: ‎02-01-2013

Re: Firmware Management

HI Antonio,


This IP  (172.28.1.14) is the Esxi, not the VM. The vm is 172.20.4.230 and the switch is 172.20.2.30. Is not network problem because  Network is 172.20.0.0/16.

 

I dont understand why me tell cant access http://172.20.4.230:443 when that IP is the Network Advisor server and the switch want  upgrade is 172.20.2.30

External Moderator
Posts: 5,436
Registered: ‎02-23-2004

Re: Firmware Management

BNA use for FW Upgrade a TFTP and use by default Port 69, - for FOS and NOS Upgarde the FTP.

 

Port 443 is not a port for FW upgrade.

 

see here Figure 11

 

http://community.brocade.com/t5/Management-Software/Brocade-Network-Advisor-Upgrade-Migration-from-12-4-x-to-14-0-1/ta-p/87273

 

it show to me as you have miss config on BNA.

TechHelp24

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.