Management Software

Reply
New Contributor
Posts: 4
Registered: ‎09-20-2017

BNA 12.3.4 Warning Message creating zones

Hi, I recently upgrade from DCFM to BNA 12.3.4. Now when i try to create a zone im getting the following error message

 

"brocade configuring a zone consisting of wwn and domain, port index zone members is not recommended in FICON environment"

 

im not using any zone with domain and port index.

 

 

how can I fix this.

 

regards,

Broadcom Moderator
Posts: 387
Registered: ‎08-31-2009

Re: BNA 12.3.4 Warning Message creating zones

Hello,

 

This is not an error but more an application warning notification and reminder for FICON.

 

 

 
Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"
New Contributor
Posts: 4
Registered: ‎09-20-2017

Re: BNA 12.3.4 Warning Message creating zones

Hi,

 

thanks for your prompt response. But I dont have any zone with WWN and Domain and Port ID. Just zones with WWN.

 

What should I do to avoid this warning message?

 

regards,

 

Broadcom Moderator
Posts: 387
Registered: ‎08-31-2009

Re: BNA 12.3.4 Warning Message creating zones

As far I know, there is no workaround to remove that message.

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"
Broadcom Moderator
Posts: 457
Registered: ‎03-29-2011

Re: BNA 12.3.4 Warning Message creating zones

If you only zone by WWN, then you should not see this (even with aliases with WWN you will see this). This is nuisance really. For the zoning you can click on the check to say that you do not want to see, but for the zoning activation there is no such box.




If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution".


Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.