For more details, please see ourCookie Policy.


Info & Feedback

Reply
New Member
Posts: 1
Registered: ‎03-08-2018

Virtual Routing Interface

Receiving this error when trying to create virtual routing interface

 

LPK-ICX6610-01(config)#
LPK-ICX6610-01(config)#vlan 100
LPK-ICX6610-01(config-vlan-100)#router-interface ve 100
Invalid input -> router-interface ve 100
Type ? for a list
LPK-ICX6610-01(config-vlan-100)#

------------------------------------------------------------------------------------------------------------------------------------------------

this is the output for show run

 

LPK-ICX6610-01(config)#sh run
running-config Current running-config
LPK-ICX6610-01(config)#sh running-config
Current configuration:
!
ver 08.0.10gT7f1
!
stack unit 1
module 1 icx6610-24-port-management-module
module 2 icx6610-qsfp-10-port-160g-module
module 3 icx6610-8-port-10g-dual-mode-module
stack-trunk 1/2/1 to 1/2/2
stack-trunk 1/2/6 to 1/2/7
stack-port 1/2/1 1/2/6
stack enable
!
!
!
!
vlan 1 name DEFAULT-VLAN by port
!
vlan 10 name LANUSER_GF by port
tagged ethe 1/1/3
!
vlan 20 name LANUSER_1F by port
!
vlan 100 name WLAN by port
tagged ethe 1/1/23 to 1/1/24
untagged ethe 1/1/12
!
!
!
!
hostname LPK-ICX6610-01
no ip dhcp-client enable
ip dhcp-server enable
!
ip dhcp-server pool vlan_100
dhcp-default-router 192.168.100.254
dns-server 1.9.1.9 8.8.8.8
excluded-address 192.168.100.1 192.168.100.10
lease 0 12 0
network 192.168.100.0 255.255.255.0
deploy
!
!
!
!
!
!
!
!
!
!
!
end

LPK-ICX6610-01(config)#sh ver
version System status
LPK-ICX6610-01(config)#sh version
Copyright (c) 1996-2014 Brocade Communications Systems, Inc. All rights reserved.
UNIT 1: compiled on Dec 17 2014 at 18:25:28 labeled as FCXS08010g
(7280225 bytes) from Primary /FCXS08010g.bin
SW: Version 08.0.10gT7f1
Boot-Monitor Image size = 370695, Version:10.1.00T7f5 (grz10100)
HW: Stackable ICX6610-24
==========================================================================
UNIT 1: SL 1: ICX6610-24 24-port Management Module
Serial #: BXP3843N00B
License: BASE_SOFT_PACKAGE (LID: dzrINJIpFFd)
P-ENGINE 0: type E02B, rev 01
==========================================================================
UNIT 1: SL 2: ICX6610-QSFP 10-port 160G Module
==========================================================================
UNIT 1: SL 3: ICX6610-8-port Dual Mode(SFP/SFP+) Module
==========================================================================
800 MHz Power PC processor 8544E (version 0021/0023) 400 MHz bus
65536 KB flash memory
512 MB DRAM
STACKID 1 system uptime is 1 hours 54 minutes 55 seconds
The system : started=cold start

External Moderator
Posts: 5,435
Registered: ‎02-23-2004

Re: Virtual Routing Interface

@2Y Comm

 

due a acquisition by Ruckus , ICX Switches are not longer supported by Brocade.

 

please post you question in they Community.

TechHelp24
Community Manager
Posts: 252
Registered: ‎03-03-2014

Re: Virtual Routing Interface

Thanks @Antonio Bongiorno TechHelp24

 

@2Y Comm Please post your question over on the Ruckus ICX Forum Community.  They support the ICX.

 

 

Thanks

 

Jason

Community Manager

@jason_cmgr

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.