For more details, please see ourCookie Policy.


Info & Feedback

Reply
New Member
Posts: 1
Registered: ‎06-21-2018

VDX 6740

Could someone provide me will direction as to how to handle  whats happening below. 

Once I login using the default admin account, all these error messages occur.

I am a newbie with these switches --help!!

 

*************************


SECURITY WARNING: The default password for at least
one default account (root, admin and user) have not been changed.

Welcome to the Brocade Network Operating System Software
admin connected from 127.0.0.1 using console on sw0
sw0# show version

Network Operating System Software
Network Operating System Version: 5.0.2
Copyright (c) 1995-2014 Brocade Communications Systems, Inc.
Firmware name: 5.0.2
Build Time: 17:08:22 Jul 6, 2015
Install Time: 18:42:13 Apr 29, 2018
Kernel: 2.6.34.6

BootProm: 1.0.1
Control Processor: e500mc with 4096 MB of memory

Slot Name Primary/Secondary Versions Status
---------------------------------------------------------------------------
SW/0 NOS 5.0.2 ACTIVE*
5.0.2

sw0# show chassis{ 
%INFO : This command is not available in standby state.
sw0# 2018/06/21-19:31:43, [SEC-1197], 383, SW/0 | Active, INFO, VDX6740, Changed account root.
2018/06/21-19:31:43, [SEC-1204], 384, SW/0 | Active, INFO, VDX6740, Root Access mode is configured to default(SSH/Telnet/Console).
********************************************************************************************************
** Crashed in OM/Worker (DcmNs::LocalInterfaceMonitorWorker::fwBackendOpInterfacemonitorThreshold())
********************************************************************************************************

[0x100344]
DcmNs::LocalInterfaceMonitorWorker::fwBackendOpInterfacemonitorThreshold()
DcmNs::ThresholdMonitorLocalObjectManager::externalStateSynchronization(WaveNs::WaveAsynchronousContextForExternalStateSynchronization*)
WaveNs::WaveObjectManager::externalStateSynchronizationSelfStep(WaveNs::PrismLinearSequencerContext*)
WaveNs::PrismLinearSequencerContext::executeCurrentStep()
WaveNs::PrismLinearSequencerContext::executeNextStep(unsigned int const&)
WaveNs::WaveObjectManager::externalStateSynchronizationWorkersStep(WaveNs::PrismLinearSequencerContext*)
WaveNs::PrismLinearSequencerContext::executeCurrentStep()
WaveNs::PrismLinearSequencerContext::start()
WaveNs::WaveObjectManager::externalStateSynchronizationHandler(WaveNs::PrismExternalStateSynchronizationObjectManagerMessage*)
WaveNs::WaveObjectManager::PrismOperationMapContext::executeMessageHandler(WaveNs::PrismMessage*&)
WaveNs::WaveObjectManager::handlePrismMessage(WaveNs::PrismMessage*)
WaveNs::PrismThread::start()
WaveNs::PrismPosixThread::pthreadStartMethod(WaveNs::PrismPosixThread*)
/lib/libpthread.so.0 [0xe0f8e58]
clone

VERIFY - Failed: 0,
file = sysha.c, line = 111, kernel mode
CPU[1] PID[2139(hasmd)] TASKP[7d212680]
PREEMPT_COUNT[1] IRQS_DISABLED[0]
Call Trace:
STACK MAGIC 0x57ac6e9d
[7b89bb90] [40007fcc] show_stack+0x84/0x24c (unreliable)
[7b89bbf0] [4055a4f4] dump_stack+0x2c/0x44
[7b89bc00] [c15495fc] do_assert+0x3c8/0x4e8 [basic_module]
[7b89bda0] [c5e7d41c] platform_yield_control+0x54/0x84 [castor_module]
[7b89bdb0] [c5d3e6a8] ham_ioctl+0x554/0x10bc [hasm_module]
[7b89be70] [40121008] vfs_ioctl+0xbc/0xec
[7b89be90] [40121240] do_vfs_ioctl+0x94/0x774
[7b89bf00] [401219e0] sys_ioctl+0xc0/0x12c
[7b89bf40] [40011e7c] ret_from_syscall+0x0/0x3c
********************************************
* Daemon dcm:3164 died (0)
* Manual intervention, Thu Jun 21 19:31:53 2018
********************************************
2018/06/21-19:31:51, [HASM-1200], 385, SW/0 | Active | FFDC, WARNING, VDX6740, Detected termination of process Dcmd.Linux.powe:3164.
2018/06/21-19:31:51, [HASM-1014], 386, SW/0 | Active, CRITICAL, VDX6740, Daemon (dcm) terminated while the system was booting up.
2018/06/21-19:31:51, [RAS-1001], 387, SW/0 | Active, INFO, VDX6740, First failure data capture (FFDC) event occurred.
2018/06/21-19:31:51, [RAS-1004], 388, SW/0 | Active | FFDC, WARNING, VDX6740, Software 'verify' error detected.
2018/06/21-19:32:14, [RAS-1001], 389, SW/0 | Active, INFO, VDX6740, First failure data capture (FFDC) event occurred.
ls: /tmp/halog.*: No such file or directory
cat: /var/log/assert.log: No such file or directory
cpu0/0: fsl_dpa: dpa-ethernet.14: dpa_ethtool.c:48:dpa_get_settings() eth0: phy device not initialized
ioctl(ETHTOOL_GSET) failed 19
cpu0/0: fsl_dpa: dpa-ethernet.14: dpa_ethtool.c:48:dpa_get_settings() eth0: phy device not initialized
ioctl(ETHTOOL_GSET) failed 19
cpu0/0: fsl_dpa: dpa-ethernet.14: dpa_ethtool.c:48:dpa_get_settings() eth0: phy device not initialized
ioctl(ETHTOOL_GSET) failed 19
cpu0/0: fsl_dpa: dpa-ethernet.14: dpa_ethtool.c:48:dpa_get_settings() eth0: phy device not initialized
ioctl(ETHTOOL_GSET) failed 19
cpu0/0: fsl_dpa: dpa-ethernet.14: dpa_ethtool.c:48:dpa_get_settings() eth0: phy device not initialized
ioctl(ETHTOOL_GSET) failed 19
cpu0/0: fsl_dpa: dpa-ethernet.14: dpa_ethtool.c:48:dpa_get_settings() eth0: phy device not initialized
ioctl(ETHTOOL_GSET) failed 19
logout
2018/06/21-19:34:14, [SEC-3022], 390, SW/0 | Active, INFO, sw0, Event: logout, Status: success, Info: Successful logout by user [admin].

 

Highlighted
External Moderator
Posts: 5,367
Registered: ‎02-23-2004

Re: VDX 6740

[ Edited ]

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.