For more details, please see ourCookie Policy.


Info & Feedback

Reply
New Member
Posts: 1
Registered: ‎09-19-2017

InterVlan Routing in Brocade

Dear Brocade Team,
I would like to know one question , about of the intervlan routing.
Intervlan Routing in cisco, we used the "ip routing" command in L3 Switch.
For example,
cisco(config)#vlan 20
cisco(config-vlan)#vlan 30
cisco(config-vlan)#interface vlan 20
cisco(config-if)#ip address 192.168.20.1 255.255.255.0
cisco(config-if)#interface vlan 30
cisco(config-if)#ip address 192.168.30.1 255.255.255.0
cisco(config-if)#exit
After creation of the vlan 20,30,they can't ping each other because of the ip routing.
cisco(config)#ip routing

BRCD(config)#vlan 20
BRCD(config-vlan-20)#router-interface ve 20
BRCD(config-vlan-20)#vlan 30
BRCD(config-vlan-30)#router-interface ve 30
BRCD(config-vlan-30)#interface ve 20
BRCD(config-ve-20)#ip address 192.168.20.1/24
BRCD(config-ve-20)#interface ve 30
BRCD(config-ve-30)#ip address 192.168.3.1/24

Required or not the type "ip routing" command ?
Could you please help me?

Visitor
Posts: 1
Registered: ‎09-30-2018

Re: InterVlan Routing in Brocade

HI Dear Brocade team,

 

I also have the same question on my VDX 6740T & 6720.

Could you please help guide us  how to setup it?

External Moderator
Posts: 5,547
Registered: ‎02-23-2004

Re: InterVlan Routing in Brocade

@ChanMyae @Jovian

 

The VDX Switch line was acquired by Extreme Networks, please post your question on the Extreme Community

located on their VDX Forum 

TechHelp24

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.