Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 13
Registered: ‎01-18-2013

what is conncnt in "portshow FCIP tunnel" output

switch:admin> portshow fciptunnel all -c
-----------------------------------------------------------------------------
Tunnel Circuit OpStatus Flags Uptime TxMBps RxMBps ConnCnt CommRt Met/G
-----------------------------------------------------------------------------
1/22 - Up cft---- 26m51s 0.00 0.00 1 - -/-
1/22 0 1/xge0 Up ---4--s 20m26s 0.00 0.00 1 3000/5000 0/-
1/22 1 1/xge0 Up ---4--s 3s 0.00 0.00 2 3000/5000 0/1
1/22 2 1/xge0 Up ---4--s 2m7s 0.00 0.00 1 5000/5000 1/1
-----------------------------------------------------------------------------

Brocade Moderator
Posts: 382
Registered: ‎03-29-2011

Re: what is conncnt in "portshow FCIP tunnel" output

Hi Ganesh,

 

ConnCnt = Connection Count increments the times the circuit has been initialized.




If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution".


Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"
Occasional Contributor
Posts: 13
Registered: ‎01-18-2013

Re: what is conncnt in "portshow FCIP tunnel" output

Thanks for the reply Martin. 

 

Does that mean if the count is 0 then that circuit or circuits were initialized first and if the count is 2 or 3 etc that circuit(s) got initialized at later time ?

 Any document or link that elborate significance of that parameter and why and when should I care about it?

 

Regards

Ganesh

Brocade Moderator
Posts: 382
Registered: ‎03-29-2011

Re: what is conncnt in "portshow FCIP tunnel" output

Hi Ganesh,

 

my reading is that the counter is increment every time the circuit is initialized (again). So repeating initializing of circuit means that it will not be stable and up, right?




If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution".


Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

Download FREE NVMe eBook