Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 6
Registered: ‎03-14-2012

spinfab error

hi can anybody explain the error below

link is 2 G using Multiplexer device , i have very slow transfer rate max 17MB/s  and when i run spinfab i got error

DCX-Lower-sw01:admin> spinfab -ports 2/19

Running spinfab ..............

ERROR: DIAG PORTSTOPPED spinfab:spinfab, 0 nMegs,

Pt2/19(66) Ch1/26 No Longer Transmitting, FTX Counter Stuck at 72814901,

Err# 13A012E 0242

spinfab: Completed 11 megs, status:  FAILED.

        port 83 test status: 0x00000002 --  FAILED.

FAILED.

Occasional Contributor
Posts: 6
Registered: ‎03-14-2012

Re: spinfab error

any help

External Moderator
Posts: 5,046
Registered: ‎02-23-2004

Re: spinfab error

--->>>...link is 2 G using Multiplexer device

is the link as xWDM ?

have you tried to Fix the Port Speed at 2G instead AN ?

TechHelp24
Occasional Contributor
Posts: 6
Registered: ‎03-14-2012

Re: spinfab error

Hi here full details

portspeed on both side is N2 ( auto)

we have huawei dwdm fc200 2.125G   fiber link connect two DataCenter , when we issue spinfab we got the below error , kindly advice

DCX-Lower-sw01:admin> spinfab -ports 2/19

Running spinfab ..............

ERROR: DIAG PORTSTOPPED spinfab:spinfab, 0 nMegs,

Pt2/19(66) Ch1/26 No Longer Transmitting, FTX Counter Stuck at 89583125,

Err# 13A012E 0242

spinfab: Completed 11 megs, status:  FAILED.

         port 83 test status: 0x00000002 --  FAILED.

  FAILED.

DCX-Lower-sw01:admin>

kindly note link transfer rate is slow we got as max 16MB/s.

siwtches DS-4900B FOS v5.1.0a

DCX-4S  FOS v6.4.2a

is there any parameter to change on brocade

----------------

fcping  10:00:00:05:1e:04:be:18

Destination:    10:00:00:05:1e:04:be:18

Pinging 10:00:00:05:1e:04:be:18 with 12 bytes of data:

received reply from 10:00:00:05:1e:04:be:18: 12 bytes time:1385 usec

received reply from 10:00:00:05:1e:04:be:18: 12 bytes time:1284 usec

received reply from 10:00:00:05:1e:04:be:18: 12 bytes time:1227 usec

received reply from 10:00:00:05:1e:04:be:18: 12 bytes time:1264 usec

received reply from 10:00:00:05:1e:04:be:18: 12 bytes time:1676 usec

5 frames sent, 5 frames received, 0 frames rejected, 0 frames timeout

Round-trip min/avg/max = 1227/1367/1676 usec

-------------------

DCX-Lower-sw01:admin> islshow

  1: 17-> 23 10:00:00:05:33:5c:98:3a  43 HP_Enc1_sw1     sp:  8.000G bw:  8.000G

  2: 72->  0 10:00:00:05:33:5c:98:3a  43 HP_Enc1_sw1     sp:  8.000G bw:  8.000G

  3: 83-> 44 10:00:00:05:1e:04:be:18   1 Fabric-A        sp:  2.000G bw:  2.000G

--------------

portshow 2/19

portIndex:  83

portName:

portHealth: HEALTHY

Authentication: None

portDisableReason: None

portCFlags: 0x1

portFlags: 0x10004907    PRESENT ACTIVE E_PORT G_PORT LOGICAL_ONLINE LOGIN LED

LocalSwcFlags: 0x0

portType:  17.0

portState: 1    Online

Protocol: FC

portPhys:  6    In_Sync         portScn:   16   E_Port

port generation number:    12098

state transition count:    22

portId:    1b5300

portIfId:    43220802

portWwn:   20:53:00:05:33:25:49:00

portWwn of device(s) connected:

Distance:  normal

portSpeed: N2Gbps

LE domain: 0

FC Fastwrite: OFF

Interrupts:        0          Link_failure: 63         Frjt:         0

Unknown:           0          Loss_of_sync: 22         Fbsy:         0

Lli:               203        Loss_of_sig:  42

Proc_rqrd:         415367     Protocol_err: 0

Timed_out:         0          Invalid_word: 565795

Rx_flushed:        0          Invalid_crc:  0

Tx_unavail:        0          Delim_err:    0

Free_buffer:       0          Address_err:  2

Overrun:           0          Lr_in:        19

Suspended:         0          Lr_out:       13

Parity_err:        0          Ols_in:       3

Suspended:     0      Lr_out:   13
Parity_err:    0      Ols_in:   3
2_parity_err:  0      Ols_out:  36
CMI_bus_err:   0

Port part of other ADs: No

Occasional Contributor
Posts: 6
Registered: ‎03-14-2012

Re: spinfab error

so what do you think

External Moderator
Posts: 5,046
Registered: ‎02-23-2004

Re: spinfab error

--->>>so what do you think

->siwtches DS-4900B FOS v5.1.0a

->DCX-4S  FOS v6.4.2a

->is there any parameter to change on brocade

FOS 6.4.x is not supported with FOS v5.1.x and required a minimum Release of FOS 5.3.2 or higher.

I would first upgarde the FOS.

before you start Upgrade, check compatibility Matrix about Supported Array, HBA and other Connectivity.

TechHelp24
Occasional Contributor
Posts: 6
Registered: ‎03-14-2012

Re: spinfab error

many thanks

can you tell which document say FOS 6.4.x is not supported with FOS v5.1.x

External Moderator
Posts: 5,046
Registered: ‎02-23-2004

Re: spinfab error

See attached Release Notes v6.4.2a

TechHelp24

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook