Fibre Channel (SAN)

Reply
New Contributor
Posts: 4
Registered: ‎10-10-2013
Accepted Solution

problem in zoning log I need help

I have a brocade switch 4100 with O.S 5.2.0a

when I collect supportshow & supportsave 

I get the following 

 

switchstatusshow:
Switch Health Report Report time: 11/03/2013 12:50:14 PM
Switch Name: S1
IP address: 192.168.119.1
SwitchState: HEALTHY
Duration: 963:37

Power supplies monitor HEALTHY
Temperatures monitor HEALTHY
Fans monitor HEALTHY
Flash monitor HEALTHY
Marginal ports monitor HEALTHY
Faulty ports monitor HEALTHY
Missing SFPs monitor HEALTHY


All ports are healthy

switchshow:
switchName: S1
switchType: 32.0
switchState: Online
switchMode: Native
switchRole: Subordinate
switchDomain: 11
switchId: fffc0b
switchWwn: 10:00:00:05:1e:03:f5:02
zoning: OFF
switchBeacon: OFF

 

and show analysis

Effective Configuration Warnings Zoning is OFF on this switch
 
But when I use "switchshow"
and "cfgactvshow"
 
it shows that there are an active zone already running 
 
I need your help as soon as possible 
Thanks

 

New Contributor
Posts: 2
Registered: ‎11-07-2013

Re: problem in zoning log I need help

Have you tried enabling a zone configuration again?

 

Valued Contributor
Posts: 761
Registered: ‎06-11-2010

Re: problem in zoning log I need help

Hi,

 

If you the switch is working without issues, that may just be a cosmetic issue. The FOS release is veeery old, so and upgrade would be a good choice.

 

Rgds

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook