Fibre Channel (SAN)

Reply
Contributor
Posts: 20
Registered: ‎04-29-2012

port display of specific slot

hi,

1. do we have any command to display all ports of specific slot

like in Cisco  #show interface fc1/1-20   ( to display 1-20 port of module/slot 1 )

2. also any command we can get the flogi wwn of that port otherthan switchshow

   port

   1        xx:xx:xx:xxxxxxx

   2        xx:xx:xx:xxxxxx

thankx

Valued Contributor
Posts: 931
Registered: ‎12-30-2009

Re: port display of specific slot

  1. portshow -i {portindex#}-{portindex#}
    gives port info accros range specified
  2. portloginshow 2/14
    shows logged-in/registered wwn's against slot 2 port14
Contributor
Posts: 20
Registered: ‎04-29-2012

Re: port display of specific slot

thank you for the information

question: let say if i want to display the info of  ports of slot 1  range 1-20 ( but their port indexs are not in sequence , index 20 can be port of 2/4 ) do brocade has any cmd for that.

Valued Contributor
Posts: 931
Registered: ‎12-30-2009

Re: port display of specific slot

I only know you can give a portrange based on index #, which is across blades, and by specific slot and port number.

Valued Contributor
Posts: 549
Registered: ‎03-20-2011

Re: port display of specific slot

switchshow -slot <slot>

Contributor
Posts: 20
Registered: ‎04-29-2012

Re: port display of specific slot

this is what i am looking for ...thank you so much guys

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.