Fibre Channel (SAN)

Reply
New Contributor
Posts: 2
Registered: ‎02-04-2014
Accepted Solution

Where I can download the MIBS for this OID: 1.3.6.1.4.1.1588.2.1.1.72

Where I can download the MIBS for this OID:

1.3.6.1.4.1.1588.2.1.1.72,
1.3.6.1.4.1.1588.2.1.1.64,

1.3.6.1.4.1.1588.2.1.1.43

Broadcom Moderator
Posts: 333
Registered: ‎08-31-2009

Re: Where I can download the MIBS for this OID: 1.3.6.1.4.1.1588.2.1.1.72

Hello,

 

Those OIDs are not referenced into MIB files and product documentations.

What specifics objects are you trying to pull?

 

From Brocade website: http://my.brocade.com, you will be able to download MIB files associated to FOS versions and also FOS MIB reference files for the different FOS releases.

 

 

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"
New Contributor
Posts: 2
Registered: ‎02-04-2014

Re: Where I can download the MIBS for this OID: 1.3.6.1.4.1.1588.2.1.1.72

Yes I know that... we are using the MIBS from FOS 6.3.2b and 6.2.2e, but  we are reciving this traps

 

See the word file with the image https://www.dropbox.com/s/tz9c2i2r4nkm4li/Doc1.docx?dl=0

 

Regards,

 

 

 

 

 

Broadcom Moderator
Posts: 333
Registered: ‎08-31-2009

Re: Where I can download the MIBS for this OID: 1.3.6.1.4.1.1588.2.1.1.72

Those OIDs are customized OIDs.

 

Because Fabric OS releases prior to v5.2.0 used to show the Enterprise Field in the swTraps from the sysObjectID (set using config variable "snmp.sysObjectID"), the Enterprise field will not always be resolved to "sw". If the sysObjectID is changed by user the Enterprise field in the trap will show some unresolved value.
To resolve this issue, beginning with the v5.2.0 release the SNMP configuration variable snmp.trapEnterpriseFlag lets you define the way that the Enterprise field displays.
Select either the previous behavior in which the Enterprise field is taken from sysObjectID or the new behavior in which the value in the Enterprise field will always be "sw":
* Set the value of this variable to 0, to use the sysObjectID.
* Set the value to 1 to use the fixed enterprise value, "sw" (1.3.6.1.4.1.1588.2.1.1.1.)

 

There is no FOS command to do this, but the value can be changed by editing the config file as follows:

Perform a configupload, then change the following values and configdownload:
snmp.trapEnterpriseFlag:1
snmp.sysObjectID:1588.2.1.1.1

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"
Broadcom Moderator
Posts: 333
Registered: ‎08-31-2009

Re: Where I can download the MIBS for this OID: 1.3.6.1.4.1.1588.2.1.1.72

For example: 1.3.6.1.4.1.1588.2.1.1.72 is the designed value for NC5480 (which should be IP@10.107.12.59) 

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"
Broadcom Moderator
Posts: 333
Registered: ‎08-31-2009

Re: Where I can download the MIBS for this OID: 1.3.6.1.4.1.1588.2.1.1.72

You can also ask your switch provider for deliver the specific MIB.

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook