Fibre Channel (SAN)

Reply
New Contributor
Posts: 2
Registered: ‎07-28-2010
Accepted Solution

What is this "ag.port.nfporttopo"

Hi,

 

we have to San Directors and backuped the conifg. I have compared it and one one of the switches are these settings:

ag.port.nfporttopo.0:0x0
ag.port.nfporttopo.1:0x0
ag.port.nfporttopo.10:0x0
ag.port.nfporttopo.11:0x0
ag.port.nfporttopo.12:0x0
ag.port.nfporttopo.13:0x0
ag.port.nfporttopo.14:0x0
ag.port.nfporttopo.15:0x0
ag.port.nfporttopo.16:0x0
ag.port.nfporttopo.17:0x0
ag.port.nfporttopo.18:0x0
ag.port.nfporttopo.19:0x0
ag.port.nfporttopo.2:0x0
ag.port.nfporttopo.20:0x0
ag.port.nfporttopo.21:0x0
ag.port.nfporttopo.22:0x0
ag.port.nfporttopo.23:0x0
ag.port.nfporttopo.24:0x0
ag.port.nfporttopo.25:0x0
ag.port.nfporttopo.26:0x0
ag.port.nfporttopo.27:0x0
ag.port.nfporttopo.28:0x0
ag.port.nfporttopo.29:0x0
ag.port.nfporttopo.3:0x0
ag.port.nfporttopo.30:0x0
ag.port.nfporttopo.31:0x0
ag.port.nfporttopo.32:0x0
ag.port.nfporttopo.33:0x0
ag.port.nfporttopo.34:0x0
ag.port.nfporttopo.35:0x0
ag.port.nfporttopo.36:0x0
ag.port.nfporttopo.37:0x0
ag.port.nfporttopo.38:0x0
ag.port.nfporttopo.39:0x0
ag.port.nfporttopo.4:0x0
ag.port.nfporttopo.5:0x0
ag.port.nfporttopo.6:0x0
ag.port.nfporttopo.7:0x0
ag.port.nfporttopo.8:0x0
ag.port.nfporttopo.9:0x0

 

What is this setting, and is it possible on the second one?

Thanks

Valued Contributor
Posts: 547
Registered: ‎03-20-2011

Re: What is this "ag.port.nfporttopo"

These entries are from the Access Gateway configuration. Director class switches are not allowed to run in the AG mode. Looking at the port numbers, most likely this director was sometimes configured using the backup config taken from 5100 switch. I hope it's safe to ignore these entries, and most likely the switch itself is ignoring them as well.
New Contributor
Posts: 2
Registered: ‎07-28-2010

Re: What is this "ag.port.nfporttopo"

Thank you

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.