Fibre Channel (SAN)

Reply
New Contributor
Posts: 4
Registered: ‎12-30-2004

V5.0.1b firmware

I upgraded our 12000 from 4.2 to 5.0.1b. Web Tools no longer accepts userid and passwords. I'm using IE 6.0. Has anyone else run into this?

New Contributor
Posts: 3
Registered: ‎01-03-2006

Re: V5.0.1b firmware

Yes, I have the same problem with our two 200E switches, have anyone found any solutions fot that ?

New Contributor
Posts: 4
Registered: ‎12-30-2004

Re: V5.0.1b firmware

I unfortunately have to work with IBM support. They have not found a solution yet.

New Contributor
Posts: 3
Registered: ‎01-03-2006

Re: V5.0.1b firmware

I found solution, strange but the problem was with the ethernet autonegotiation, when I have connected direct to the switch with cross-over cable everythink was ok, than on my ethernet switch I set up manually speed for the 100Mb/s and Web Tools starts to work.....

Occasional Contributor
Posts: 11
Registered: ‎07-25-2005

Re: V5.0.1b firmware

I thought you can't make the jump from v4.2.x directly to v5.0.1b without going to at least v4.4.x .

New Contributor
Posts: 4
Registered: ‎12-30-2004

Re: V5.0.1b firmware

OK, I'm a networking hack. Can you tell me how you set up the PC to do the point to point with the switch?Thanks

New Contributor
Posts: 3
Registered: ‎01-03-2006

Re: V5.0.1b firmware

Just connect PC and switch with a cross-over cable and setup on PC IP address from the switch network range....

Contributor
Posts: 24
Registered: ‎11-28-2005

Re: V5.0.1b firmware

Could it be something between the firmware?

New Contributor
Posts: 4
Registered: ‎12-30-2004

Re: V5.0.1b firmware

Actually it was the way my IE was configured. You can not have a proxy server configured.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

Download FREE NVMe eBook