Fibre Channel (SAN)

Reply
New Contributor
Posts: 5
Registered: ‎10-28-2003

Using Telnet with a fibre channel connection

I currently have a switch(6400/2250 firmware, 2.6.1c) that has locked me out from accepting telnet sessions via ethernet. If I configure a fibre channel IP on the switch and then access it via an HBA that has also been assigned a fibre IP, will I get the same responce from the telnet request?

Occasional Contributor
Posts: 17
Registered: ‎08-08-2003

Re: Using Telnet with a fibre channel connection

is this the message you are getting when attempting telnet connection?if so, you can use web tools to connect to the switch and then disconnect the existing telnet connection.

New Contributor
Posts: 5
Registered: ‎10-28-2003

Re: Using Telnet with a fibre channel connection

This is what I get. Connection to fswbrc09.qst07 closed by foreign host.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook