Fibre Channel (SAN)

Reply
New Contributor
Posts: 2
Registered: ‎04-06-2012

Two master ports in a trunk.

Hi People,

     I have this issue. I have two directors connected by two fibres joining two separate sites, forming a trunk with a master and a slave. The other day we needed to replace a fibre by another one which goes by another "road", always joining both sites. The thing is that once we connect the new fibre, both port become Master. They both are in the same quad. Any idea why this can happen?

thanx in advance

Gabriel

Regular Contributor
Posts: 226
Registered: ‎01-08-2011

Re: Two master ports in a trunk.

Hi Gabriel,

could you post the output of 'trunkshow' on the switches?

Occasional Contributor
Posts: 19
Registered: ‎04-07-2011

Re: Two master ports in a trunk.

Can you please check if you have now two ISL or two trunks with just one link. Different cable length can cause that no trunk is formed.

If you post trunkshow output please add portcfgshow of each port.

Regards,

Andreas

Valued Contributor
Posts: 761
Registered: ‎06-11-2010

Re: Two master ports in a trunk.


Hi,

As Andreas pointed out, it seems that now you have two one-member trunks and that's why you see two masters. An easy way to check the reason why the two ISLs did not formed a single 2-member trunk can be shown with command:

trunkdebug <port1> <port2>

that will tell you the reason why the two ports do not merge into a sigle trunk (probably due to the deskew between them...)

Rgds

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook