Fibre Channel (SAN)

Reply
New Contributor
Posts: 4
Registered: ‎10-06-2016

Status error

good morning everyone ,

 

I hava a SW SAN with the folliwing Status:

:

Status                                  Description

Mod_inV-------->Speed Mismatsh/ Incompatble SFP

online.---------->Segmented/(domain overlab)

Laser FLT 

 

is possible any parnert in this community sey me why that and how can resolv this issus

 

regards

External Moderator
Posts: 4,973
Registered: ‎02-23-2004

Re: Status error

@franciscolobo

 

please post - No Image - output from

 

"sfpshow"

 

switch model and FOS release.

 

 

TechHelp24
Brocade Moderator
Posts: 299
Registered: ‎03-29-2011

Re: Status error

Hi franciscolobo,

 

1. For the segmentation error, on port 13, you will need to take one of the switches offline (switchdisable) and then run the configure command to change the domain id to not be the same. And then bounce the port 13 (or disable one switch - switchdisable; and then enable the switch again, and they will merge - if not insistent domain is set; or ....).

 

2. For the two other ports, suspect you have unsupported SFP in them, but we need the output from "sfpshow 12" and "sfpshow 13" command, please.




If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution".


Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.