Fibre Channel (SAN)

Reply
Highlighted
New Contributor
Posts: 2
Registered: ‎01-05-2010

SNMP Configuration on DS 220 Switch

Hi,

 

I am using very old DS220B FC Switches with firmware version 6.1.0j & 6.2.2b. I need to configure SNMP traps on these switches. We are using the command snmptraps -send for the same. It is nto sending any traps.

 

Brocade & EMC are not supporting as this is an EOSL product. I wanted to know if anyone has a way to get this configured and can help me with some pointers or documents, it would be really greatful.

 

Thanks in anticipation.

 

Regards,

Anuj

Valued Contributor
Posts: 761
Registered: ‎06-11-2010

Re: SNMP Configuration on DS 220 Switch

Hi,

 

In order to configure SNMP traps you have to use the following command depending on the SNMP version used:

 

snmpconfig --set snmpv1

snmpconfig --set snmpv3

 

 

Rgds,

Felipon

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.