turn on suggestions
![]() Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
|
02-20-2012 08:45 AM
Hi
We have a SAN Switch 2/16 brocade 3800 (HP product number 287055-B21) firmware 3.2.1.c, which reboots constantly
When this switch is starting, shows this messages:
login: admin
Password: passed.
Running Port Register Test .... passed.
Running Central Memory Test ... passed.
Running CMI Test .............. passed.
Running Turbo RAM Test ........ passed.
Running CAM Test ..............Feb 19 20:06:22
Panic: INCONSISTENT - pt0: cmi err, 0x42, 0x80000000
reset sema 0x102dc210 for tReceive
0x10327e20 (tSwitch): Feb 19 20:06:23
CRITICAL DIAG-CAMINIT, 1, CAM Test, pass 1,
Pt0 (Bm0.0) Failed to Init: port not active,
Err# 223B
FAILED.
then the switch reboots. I disconnected the cables power, namely this switch is power off.
This switch is connected in a fabric mode.
Is this a hardware error ? If I disconnect all FC cables connected to switch and then start it, is it possible fix the issue ?
Thanks in advance
02-20-2012 09:33 AM
Think its broken based on http://h30499.www3.hp.com/t5/Storage-Area-Networks-SAN/Problem-with-HP-fc-16B/td-p/3772438
Contact HP to gave it replaced if under contract.
02-27-2012 08:38 PM
I would be surprised if HP would replce it. This switch is End-of-Support since last year.
02-28-2012 02:13 AM
Hi,
As Erwin wrote, this seems to be in EOSL so I don't see a good solution for it. The only thing that comes to my mind is that you try to boot from the secondary partition (in case this kind of switch have two...).
Good luck!