11-12-2009 05:42 AM
Searching for a Solution to restore my missing Licence Key
Use here from CLI the command "supportshow" , and collect the file. with a little Luck is the License saved in the file, otherview you can get the License from Brocade if you have a Support Contract or must Buy new License Key.
This is what i found on my "San Director" Is there a possibility to restore old WebTools License Key
Brocade Silkworm 24000
processor : 0
cpu : 440GP Rev. C
revision : 4.129 (pvr 4012 0481)
bogomips : 699.59
machine : Brocade Silkworm440
plb bus clock : 133MHz
pci bus clock : 33MHz
uart clock : 0KHz (internal)
Boot PROM: Version 4.5.3, Checksum: 027e0d63, Wed Oct 4 03:50:34 2006
Platform: SWBD21, Revision 1
Processor: CPU: 466 MHz PowerPC
Main memory: 256 MB (ECC) @ 0x00000000
Primary data cache: 32 KB, 32 B lines
Primary instruction cache: 32 KB, 32 B lines
LoadIdentifiers=Fabric Operating System;Fabric Operating System
Slot Name Appl Primary/Secondary Versions Status
5 CP0 FOS v5.3.0 ACTIVE *
6 CP1 FOS v5.3.0 STANDBY
Can anyone Help where I have to Look to find my Keys.
11-12-2009 06:30 AM
log as admin and post here the output License Key and License Name from "licenseshow"
FYI. It is not necessary to spend a Time to edited the License whit XXXX
noboby can use you License, because thsi are Unique by WWN Address
this other TWO Key which youe have edited and posted here, is thsi the webtools ?
11-12-2009 06:37 AM
licenseshow: nolicense installed
Have phone contact with Brocade
They mean the license is stored in the wwn Card inside of the Switch (Backplane?) and not on the CP Card.
Seems to be right because i have changed both of my cp cards and the missing license in Web tools still exist.
Will wait for solution from Brocade.
In Attachment a screenshot.