Fibre Channel (SAN)

Reply
Contributor
Posts: 24
Registered: ‎05-16-2017
Accepted Solution

QOS all or nothing ??

Hi all Brocade People,

 

We have dual Fabric installed with each 2 Core and 10 Edge Switches, in all Edge Switches is the QOS switched to ON in Core is Not On.

 

My Question: What is the correct setting for the whole Fabric

 

(We dont use QOS).

 

Best regards

Ernst

Brocade Moderator
Posts: 311
Registered: ‎08-31-2009

Re: QOS all or nothing ??

Hello,

 

The recommendation is to place off QoS if not used.

 

 

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"
Contributor
Posts: 24
Registered: ‎05-16-2017

Re: QOS all or nothing ??

Dear Thierry,

 

Thanks

Regards

Ernst

Brocade Moderator
Posts: 382
Registered: ‎03-29-2011

Re: QOS all or nothing ??

Do not forget if you want to use SDDQ with 7.4, QoS needs to be enabled on ISLs....




If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution".


Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

Download FREE NVMe eBook