Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 5
Registered: ‎01-18-2010

Procedure to Upgrade FOS of 48K

Procedure to Upgrade FOS of 48K

Hi I would like to know what are the step to upgrade the FOS of 48K?

I tried to do it before, but I get this error:

Firmware is being downloaded to standby CP. This step may take up to 30 minutes.

Firmware download failed on standby CP - Unable to access the package list file. Check whether the file name is specified properly. (0x12)

Please use firmwaredownloadstatus and firmwareshow to see the firmware status.

And the 48K just have one lan connection and i was connected direct to the active cp.

Best Regards

Carlos Serrano

Super Contributor
Posts: 644
Registered: ‎03-01-2007

Re: Procedure to Upgrade FOS of 48K

Make sure the Director is in the same IP Range as the FTP and not behind by Firewall.

Make sure you have started the Upgrade Procedure by a Min. required FOS release as the current installed.

Contributor
Posts: 56
Registered: ‎09-14-2009

Re: Procedure to Upgrade FOS of 48K

===>And the 48K just have one lan connection and i was connected direct to the active cp.

I'm sure that both lan connections are needed and need to be in the same addr range....

Make sure you upgrade in steps..ie 6.1.x then 6.2.x then 6.3.x....

Cheers

Andy

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook