10-14-2015 03:56 AM - edited 10-14-2015 03:58 AM
We have connected a server with a hba Emulex LPe16002 FV10.2.405.32 DV10.2.370.8
The brocade switch doesnt detect anything, the port shows as no_light.
We have reviewed the licenses and we have all ports licensed and we have reviewed the matrix compatibility and the hba is supported.
Somebody Knows what happen with this hba?
Solved! Go to Solution.
10-14-2015 05:26 AM
have you tried with another FC Cable ?
in rare case is the cable Plug TX and RX Inverted, dismount the Plug holder and try to invert TX with RX.
if the problem persist check the HBA SFP
10-14-2015 08:31 AM
Some operating systems need their device discovery to run in order to switch the HBA's lights on. For example if you put a new Emulex in a IBM system p (while running), you need to run cfgmgr. Otherwise the lights stay off.
10-19-2015 03:36 AM
We have reinstalled the OS, it is a new server and it was not ok, probably the first installation not finished ok.
After that, the hba Lpe16002 has started to go. The hba is ok and is detected by the Brocade switch.
Thank you very much.