Fibre Channel (SAN)

PortlogDump event Descriptions Table.

by on ‎12-11-2009 03:57 AM (154 Views)

Notice: The information in this Contribution is provided “AS IS,” without warranty of any kind.

The author TechHelp24 reserves the right to make changes to this document at any time, without notice, and assumes no responsibility for its use.

The author TechHelp24 shall have no liability or responsibility to any person or entity with
respect to any loss, cost, liability, or damages arising from the information contained in this contribution.

  • Intepreting Example of command "PortlogDump" output

timetaskeventportcommandarguments
10:20:30.456INTRpstate31WS00000000,00000000,00000000

  • This simple table show PortlogDump event Descriptions.
  • Take note please, this table is currently incompleted, and will be completed soon.

EventDescription
startDescribes a switch start or re-start event.
disableIndicates a port is disabled.
enableIndicates a port is enabled.
ioctlIndicates a port I/O control is executed.
TxIndicates a frame is transmitted.
Tx()Indicates a frame is transmitted, class 1, 2 or 3.
RxIndicates a frame is received.
Rx()Indicates a frame is received, class 1, 2 or 3.
statsIndicates a port status or statistics.
scnIndicates a state change notification.
pstateIndicates a port changes physical state.
rejectIndicates that a frame is rejected.
busyIndicates a received frame is busied.
ctinIndicates a Common Transport (CT) based request is received.
ctouIndicates a Common Transport (CT) based response is transmitted.
errlogIndicates a message is added to the error log.
loopscnIndicates a loop state change notification.
createIndicates a task is created.
debugIndicates generic debugging information.
nbrfsmIndicates a neighbor state transition.
timerIndicates a timer.
snIndicates a speed negotiation.
nsRemQIndicates an inter-sw NS query.
nsRemRIndicates an inter-sw NS response.
RSCNIndicates a Registered State Change Notification (RSCN).
ReconfIndicates a fabric reconfiguration.
DebugIndicates generic debugging information.
psIndicates a primitive sequence - used to denote pstates.

  • Table show Speed Negotiation Command (cmd) Code

AbbreviationDescription/Stage
NCNegotiation Complete Stage
NFNegotiate Follow Stage
NMNegotiate Master Stage
WSWait for Signal Stage