Fibre Channel (SAN)

Reply
N/A
Posts: 1
Registered: ‎08-09-2007

MRTG graphing via SNMP

I have recently setup snmp monitoring via MRTG to graph the read/write I/O on my 48000s. However, now I would like to use the SNMP OID for swTrunkGrpTx and swTrunkGrpRx so I can gather info on trunk throughput. I get successful output from the snmpwalk command, but MRTG fails with:

SNMP Error:

Received SNMP response with error code

error status: noSuchName

index 1 (OID: 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.3)

SNMPv1_Session (remote host: "jfbfcst1" http://146.217.203.59.161)

community: "public"

request ID: 1668000953

PDU bufsize: 8000 bytes

timeout: 2s

retries: 5

backoff: 1)

at /usr/local/bin/../lib/mrtg2/SNMP_util.pm line 491

SNMPGET Problem for 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.3 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.3 sysUptime sysName on public@jfbfcst1::::::v4only

at /usr/local/bin/mrtg line 2202

2008-04-17 14:34:39: ERROR: Target ' $target->{$mode} ' did not eval into defined data

2008-04-17 14:34:39: ERROR: Target ' $target->{$mode} ' did not eval into defined data

I realize this is an MRTG error, but was wondering if anyone else is using MRTG for capturing trunk info?

New Contributor
Posts: 3
Registered: ‎04-16-2008

Re: MRTG graphing via SNMP

hi,

i'm using oid 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12.19 and 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11.19 to graph my isl (19 is the number of the port).

StB

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

Download FREE NVMe eBook