Fibre Channel (SAN)

Reply
Highlighted
Occasional Contributor
Posts: 15
Registered: ‎01-18-2013
Accepted Solution

MAPS email alert field values

hi Team,

 

I am setting up MAPS for a customer and after generated the test email he received it as below

 

Switch Time:
Affected Entity:
Rule Name: Test mail from switch
Condition:
Current Value:
Dashboard Category: N/A
Switch Name: xx_Brocade7800_xx
Switch WWN: 10:00:50:xx:xx:xx:xx:xx
Switch IP: 10.xx.xx.252
Fabric Name: uninitialized
VFID: 128

 

Now there are fields in the email like Fabric name showing as unitialized though the switches are configured and up, and other fields like Switch Time, Affected Entity etc.

I would like to know where  in MAPS or Switch I can configure those fields so that the email alerts will show the necessary values for it?

Broadcom Moderator
Posts: 73
Registered: ‎03-29-2010

Re: MAPS email alert field values

Here ya go:

 

BRCD_sw01:admin>fabricname --set <your_chosen_fabric_name>

 

Note, double dash before 'set'! Requires admin or higher priviledges.

doc

Any and all information provided by me is for entertainment value and should not be relied upon as a guaranteed solution or warranty of mechantability. All systems and all networks are different and unique. If you have a concern about data loss, or network disconnection, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, Please mark it with the button at the bottom "Accept as solution".

Occasional Contributor
Posts: 15
Registered: ‎01-18-2013

Re: MAPS email alert field values

Bingo!!

 

Thanks doc.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.