Fibre Channel (SAN)

Reply
Contributor
Posts: 26
Registered: ‎07-26-2009

Is it possible to have https working with an access gateway%3F

I'm using BNA in https discovery mode. Is it posible to install a certificate to an AG and discover it with BNA?

 

Best Regards, MiikaP

Valued Contributor
Posts: 761
Registered: ‎06-11-2010

Re: Is it possible to have https working with an access gateway%3F

Hi,

 

if the switch model supports HTTPS, I reckon that if doesn't matter if it is working in AG mode or not.

 

Rgds

Contributor
Posts: 26
Registered: ‎07-26-2009

Re: Is it possible to have https working with an access gateway%3F

Hmm... It says:

 

encprd08-agw1:admin> seccertutil
Error: This command is not supported in AG mode

when I try to run seccertutil...

 

Rgds, MiikaP

Valued Contributor
Posts: 761
Registered: ‎06-11-2010

Re: Is it possible to have https working with an access gateway%3F

Hi,

 

As per the CLI guide, when it comes to seccertutil, it states the following:

 

This command is also supported in Access Gateway mode, for FCAP authentication between AG and  the switch.

 

So it seems that this command is not supported in interactive mode (without parameters) and that it can only be used for FCAP auth against the switch.

 

Rgds,

Felipon

Contributor
Posts: 26
Registered: ‎07-26-2009

Re: Is it possible to have https working with an access gateway%3F

Hi!

 

After upgrade to v7.1.1c seccerttutil seems to work normally (at least genkey worked). Let's see whther HTTPS works after uploading the certificate..

 

Rgds, MiikaP

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

Download FREE NVMe eBook