Fibre Channel (SAN)

Reply
Occasional Visitor
Posts: 1
Registered: ‎11-12-2015

Invalid Ordered Sets

I've looked around and have found limited resources with troubleshooting a possible issue I'm having in my Brocade M5424.

 

From the manaul I've read my fillword is suppose to be set to 0, which it is. So, any documentation on what else my problems could be? Sorry if this is a simple quesiton I recently inherited this thing.

 

stat_wtx 2099820505 4-byte words transmitted
stat_wrx 1977624070 4-byte words received
stat_ftx 4150593694 Frames transmitted
stat_frx 3630626373 Frames received
stat_c2_frx 0 Class 2 frames received
stat_c3_frx 3630626373 Class 3 frames received
stat_lc_rx 0 Link control frames received
stat_mc_rx 0 Multicast frames received
stat_mc_to 0 Multicast timeouts
stat_mc_tx 0 Multicast frames transmitted
tim_rdy_pri 0 Time R_RDY high priority
tim_txcrd_z 172 Time TX Credit Zero (2.5Us ticks)
tim_txcrd_z_vc 0- 3: 0 0 172 0
tim_txcrd_z_vc 4- 7: 0 0 0 0
tim_txcrd_z_vc 8-11: 0 0 0 0
tim_txcrd_z_vc 12-15: 0 0 0 0
er_enc_in 0 Encoding errors inside of frames
er_crc 0 Frames with CRC errors
er_trunc 0 Frames shorter than minimum
er_toolong 0 Frames longer than maximum
er_bad_eof 0 Frames with bad end-of-frame
er_enc_out 0 Encoding error outside of frames
er_bad_os 2826930324 Invalid ordered set
er_rx_c3_timeout 0 Class 3 receive frames discarded due to timeout
er_tx_c3_timeout 0 Class 3 transmit frames discarded due to timeout
er_c3_dest_unreach 0 Class 3 frames discarded due to destination unreachable
er_other_discard 19 Other discards
er_type1_miss 0 frames with FTB type 1 miss
er_type2_miss 0 frames with FTB type 2 miss
er_type6_miss 0 frames with FTB type 6 miss
er_zone_miss 0 frames with hard zoning miss
er_lun_zone_miss 0 frames with LUN zoning miss
er_crc_good_eof 0 Crc error with good eof
er_inv_arb 0 Invalid ARB
open 0 loop_open
transfer 0 loop_transfer
opened 0 FL_Port opened
starve_stop 0 tenancies stopped due to starvation
fl_tenancy 0 number of times FL has the tenancy
nl_tenancy 0 number of times NL has the tenancy
zero_tenancy 0 zero tenancy
phy_stats_clear_ts 12-21-2014 UTC Sun 13:02:41 Timestamp of phy_port stats clear
lgc_stats_clear_ts 12-21-2014 UTC Sun 13:02:41 Timestamp of lgc_port stats clear

 

 

Area Number: 4
Speed Level: SOFT
Fill Word(On Active) 0(Idle-Idle)
Fill Word(Current) 0(Idle-Idle)
AL_PA Offset 13: OFF
Trunk Port OFF
Long Distance OFF
VC Link Init OFF
Locked L_Port OFF
Locked G_Port ON
Disabled E_Port ON
Locked E_Port OFF
ISL R_RDY Mode OFF
RSCN Suppressed OFF
Persistent Disable OFF
LOS TOV enable OFF
NPIV capability ON
QOS Port AE
Port Auto Disable: OFF
Rate Limit OFF
Mirror Port OFF
SIM Port OFF
Credit Recovery ON
F_Port Buffers OFF
E_Port Credits OFF
Fault Delay: 0(R_A_TOV)
NPIV PP Limit: 126
CSCTL mode: OFF

Frequent Contributor
Posts: 133
Registered: ‎02-05-2014

Re: Invalid Ordered Sets

These stats were cleared a year ago so you might want to create a new baseline first.

 

Enter the command "statsclear".

 

Then check if they are increasing.

 

For more info on fillwords look here: http://www.erwinvanlonden.net/tag/fillwords/

 

 

Kind regards,
Erwin van Londen
Former Brocade Distinguished Architect
http://www.erwinvanlonden.net The Fibre Channel blog


Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook