Fibre Channel (SAN)

Reply
Occasional Visitor
Posts: 1
Registered: ‎12-10-2014

Factory reset to DS-4700M

Hi,

 

How can I do to factory reset an sw DS-4700 M?

 

regards

 

Pedro

Valued Contributor
Posts: 761
Registered: ‎06-11-2010

Re: Factory reset to DS-4700M

 hi there,

 

The procedure is the following:

 

- Set the switch offline.
- At the EFCM Basic Edition interface, select Switch from the Maintenance menu at any view. 
- Click Reset Configuration and OK to reset the configuration

 

The IP Address should be changed to the defualt one, 10.1.1.10.

 

Rgds,

Felipon

New Contributor
Posts: 2
Registered: ‎12-09-2014

Re: Factory reset to DS-4700M

Hi Felipon,

 

I cant connect to the console port, I need a special configuration cable?

 

regards

 

Pete

Valued Contributor
Posts: 761
Registered: ‎06-11-2010

Re: Factory reset to DS-4700M

hi,

 

 

The cable for DS-4700M is the following:

 

Null modem cable — An asynchronous RS-232 null modem cable is required to configure product network addresses and acquire event log information through the product’s serial port. The cable has nine conductors and DB-9 female connectors.

 

And the port settings parameters to configure:

 

• Bits per second—57600
• Data bits—8
• Parity—None
• Stop bits—1
• Flow control—Hardware or None

 

Rgds,

Felipon

New Contributor
Posts: 2
Registered: ‎12-09-2014

Re: Factory reset to DS-4700M

Thanks!!!!!

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

Download FREE NVMe eBook