Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 9
Registered: ‎08-07-2013

FCIP tunnel creation error on DCX with FX8-24 (FOS 7.3.0a)

So I have two logical swithes that I am tying to connect via FCIP tunnle.  I have setup the IPIF's addesses and iproutes and I can ping both sides.  Here's my problem I'm trying to create the FCIP tunnel and I get this error;

 

portcfg fciptunnel 9/12 create --remote-ip 10.10.10.156 --local-ip 10.1.1.28 -b 100000 -B 150000 -v 100
Adaptive Rate Limiting and FCIP Trunking are not allowed without Advanced Extension License.

 

If I remove the -b & -B  I get this error;

 

portcfg fciptunnel 9/12 create --remote-ip 10.10.10.156 --local-ip 10.1.1.28 -v 100
Not all required parameters found for circuit creation.
Unknown Error

 

Can anyone provide me with some direction?

 

Thanks in advance.

Frequent Contributor
Posts: 132
Registered: ‎02-05-2014

Re: FCIP tunnel creation error on DCX with FX8-24 (FOS 7.3.0a)

Might be a syntax issue:

 

portcfg fciptunnel x/x create -S x.x.x.x -D x.x.x.x -c hardware -a 1 -s 1 -v 100

 

You mentioned --remote-ip and --local-ip. This may be incorrect as the full syntax is --local-ip-address and --remote-ip-address.

 

Give it a try. See what it does.

 

 

Kind regards,
Erwin van Londen
Former Brocade Distinguished Architect
http://www.erwinvanlonden.net The Fibre Channel blog


Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook