Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 5
Registered: ‎09-07-2009

FCIP routing creation failure

Hi expert,

 

I have a problem during FCIP conifguration test.

 

FOS: 721d

Model: FX8-24 under DCX-8510

 

Following error was happened when I was creating routing table bellow,

switch_13:FID13:admin> portshow ipif 8/ge2

Port: 8/ge2
Interface IPv4 Address    NetMask         Effective MTU  Flags
--------------------------------------------------------------
    0     192.168.13.100  255.255.255.0   1500           U R M

Flags: U=Up B=Broadcast D=Debug L=Loopback P=Point2Point R=Running
       N=NoArp PR=Promisc M=Multicast S=StaticArp LU=LinkUp
switch_13:FID13:admin> portcfg iproute 8/ge2 create 192.168.12.0 255.255.255.0 192.168.13.254
Route is an interface subnet
switch_13:FID13:admin>

 

I'm sure interface subnet was 192.168.13.0 and destination subet was 192.168.12.0. This was sure different.

 

Can you please give me suggestions what should I do with this error.

 

Kind regards,

Hiroshi

 

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook