Fibre Channel (SAN)

Reply
Highlighted
Nho
New Contributor
Posts: 2
Registered: ‎08-02-2017
Accepted Solution

Extend Fabric using switch with different firmware level

[ Edited ]

Hi Guys,

 

Just an easy question, I guess, but may be interesting to get confirmation before act.. ;)

 

Topic :

We are currently using fabric of Brocade 300 (One switch is integrated with IBM BladeCenter H and the other is IBM SAN24-B).

First switch, which is principal/domain ID 7, is at firmware level 6.2.1b

Second switch, which is subordinate/domain ID 11; is at firmware level 6.3.0b

All have the correct licences (ISL, Full Fabric etc..)

 

Objective :

Add a new third switch to the fabric : Brocade 300 (IBM SAN24-B)

 

"Problem" is :

The third (new) one has fos firmware level at 7.4.1.d

 

For the moment we can not upgrade existing switch to a newer firmware level.

This operation will be made in a near future.

 

So the question is :

Is it possible to interconnect these switches and to extend the existing fabric although firmware level are different ?

The third switch should also act as a subordinate.

 

Thanks for your help !

Brocade Moderator
Posts: 311
Registered: ‎08-31-2009

Re: Extend Fabric using switch with different firmware level

[ Edited ]

Hello,

 

Yes it is working but it is highly recommended to upgrade to the others switches to the latest FOS available.

FOS 7.4 release note indicates that minimum FOS 6.2.2d and FOS 6.3.2a are recommended for full zoning compatibility.

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"
Nho
New Contributor
Posts: 2
Registered: ‎08-02-2017

Re: Extend Fabric using switch with different firmware level

Hi Thierry,

 

I understand and take good note of your advice.

Will do the best to upgrade before interconnect but not sure this will be possible in our environment and regarding the short delay,

but for sure this will be done as soon as possible.

 

Thanks for your reply !

 

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

Download FREE NVMe eBook