Fibre Channel (SAN)

Reply
Eli
Contributor
Posts: 30
Registered: ‎03-14-2012

Configure Virtual Switch IP address

Hi,

We have DCX backbone with 3 VF: 128 (ds), 125 (open), 126 (FICON)

I had some network problems, so I deleted IP address from logical switch by the command:

ipaddrset -ls 125 --delete

When I wanted to re-configure the same IP again, I used the command:

DCX_MTF_OPEN:FID125:admin> ipaddrset -ls 125 --add 10.18.185.105/24

and the output was:

address is being changed...

Address change failed: internal error (19)

As I can see, the IP hasn't changed.

When I checked the errdump- it seems like everything is fine:

DCX_MTF_OPEN:FID125:admin> 2012/05/07-16:54:02, , 12044, SLOT 7 | CHASSIS, INFO, DCX_MTF, SW/3 IP-FC/3 IPv4 manual10.18.185.105/24 DHCP Off

2012/05/07-16:54:02, , 12045, SLOT 6 | CHASSIS, INFO, DCX_MTF, SW/3 IP-FC/3 IPv4 manual none/none DHCP Off

The IPAD-1000 code refers to information that user manually tried to change IP address.

FOS version is 6.4.2a.

Are you have any ideas??

Thanks,

Eli

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook