Fibre Channel (SAN)

Configuration

by on ‎03-28-2008 12:00 AM - edited on ‎10-30-2013 01:15 PM by bcm1 (231 Views)

DETAILED DESCRIPTION  <br/>

<br/>

This is a Command line version of the ConfigUpload and ConfigDownload. This utility makes it easy to do simple config (upload/download) to switches using a DOS command line interface. This executable has options to allow reboots after configdownload, filter the config files, and download some or all parameters depending on the reboot parameter.  <br/>

<br/>

REQUIREMENTS  <br/>

<br/>

Operating System  NT, Windows 2000 <br/>

<br/>

Interface  Command line and TCP connection to the switch <br/>

<br/>

Fabric Operating System  One of the following at a minimum:<br/>

<br/>

2.6.0d<br/>

<br/>

3.0.2g <br/>

4.0.2b <br/>

<p/>

Other  NT, DOS Command line tool, make sure you have all these files inside your path: nthapi_2.dll, xerces-c_1_7_0.dll, and brcdrpc.dll. Setting your path to the current directory, should work. <br/>

<p/>

NOTES (INCLUDING LIMITATIONS)  <br/>

<br/>

Usage:<br/>

configuration &lt;-upload | -download&gt; <br/>

<a class="jive-link-adddocument" href="http://community.brocade.com/home/community-document-picker.jspa?communityID=2006&subject=allow-reboot">allow-reboot</a> <a class="jive-link-adddocument" href="http://community.brocade.com/home/community-document-picker.jspa?communityID=2006&subject=filter-rebootprefixes">filter-rebootprefixes</a><br/>

<a class="jive-link-adddocument" href="http://community.brocade.com/home/community-document-picker.jspa?communityID=2006&subject=-uusername">-u username</a> <a class="jive-link-adddocument" href="http://community.brocade.com/home/community-document-picker.jspa?communityID=2006&subject=-ppassword">-p password
(upload=switch-to-host, download=host-to-switch)

 


NOTE: This contribution was migrated by Brocade from the former Brocade Connect community on March 13, 2008, on behalf of the author.

Contributors