Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 19
Registered: ‎06-12-2015
Accepted Solution

Configdownload fails

[ Edited ]

Hi

 

B 5100 / FOS v7.4.1e /

 

My customer did a configupload, and then tried to download the config 1 day later

He gets an error

VF is enabled
Looks like the VF config can sucesssfully be downloaded
2017/05/18-13:09:52, [CONF-1000], 22937, FID 100, INFO, ISLART9999, configDownload completed successfully for fid 100.
2017/05/18-13:10:51, [CONF-1000], 22940, FID 100, INFO, ISLART9999, configDownload completed successfully for fid 50.

While the chassisconfig download failed
2017/05/18-13:17:51, [CONF-1023], 22947, FID 100, INFO, ISLART9999, configDownload failed for chassis.

 

 

ISLART9999 / B 5100 / FOS v7.4.1e / Domain ID 99 (unconfirmed)
--------------------------------------------------------------
* Device information
- WWN: xxxxxx
- IP address: xxxxxx
- Serial number: xxxxx
- Vendor serial number: xxxx
* HW platform
- active
* SW platform
- active (released December 2016)

*


* errdump section
-
2017/05/16-10:40:17, [CONF-1001], 22684, FID 100, INFO, ISLART9999, configUpload completed successfully for VF config parameters.
2017/05/16-10:40:39, [CONF-1001], 22685, FID 100, INFO, ISLART9999, configUpload completed successfully for all.

2017/05/16-11:13:13, [CONF-1023], 22699, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/17-13:11:03, [CONF-1031], 22749, FID 100, INFO, ISLART9999, configDefault completed successfully for fid 100.

2017/05/17-13:22:14, [CONF-1023], 22779, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/17-13:33:54, [CONF-1023], 22793, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/17-13:37:20, [CONF-1023], 22794, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/17-14:10:56, [CONF-1023], 22800, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/17-14:11:40, [CONF-1023], 22802, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/17-14:13:06, [CONF-1023], 22803, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/17-14:17:06, [CONF-1023], 22804, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/17-14:19:50, [CONF-1023], 22806, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/17-14:20:58, [CONF-1023], 22807, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/17-14:25:27, [CONF-1023], 22808, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/17-14:41:47, [CONF-1023], 22809, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/17-14:52:55, [CONF-1023], 22810, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/17-15:00:30, [CONF-1023], 22825, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/17-15:00:50, [CONF-1023], 22826, FID 50, INFO, switch_50, configDownload failed for chassis.
2017/05/17-15:08:18, [CONF-1023], 22827, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/18-07:32:36, [CONF-1023], 22846, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/18-08:43:41, [CONF-1031], 22852, FID 100, INFO, ISLART9999, configDefault completed successfully for fid 100.
2017/05/18-09:08:05, [CONF-1023], 22880, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/18-10:24:18, [CONF-1023], 22882, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/18-10:58:17, [CONF-1023], 22898, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/18-11:55:30, [CONF-1023], 22900, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/18-12:00:02, [CONF-1023], 22917, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/18-12:54:34, [CONF-1023], 22931, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/18-12:55:12, [CONF-1023], 22932, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/18-13:09:52, [CONF-1000], 22937, FID 100, INFO, ISLART9999, configDownload completed successfully for fid 100.
2017/05/18-13:10:51, [CONF-1000], 22940, FID 100, INFO, ISLART9999, configDownload completed successfully for fid 50.
2017/05/18-13:15:41, [CONF-1000], 22944, FID 50, INFO, switch_50, configDownload completed successfully for fid 50.
2017/05/18-13:17:08, [CONF-1023], 22945, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/18-13:17:27, [CONF-1023], 22946, FID 50, INFO, switch_50, configDownload failed for chassis.
2017/05/18-13:17:51, [CONF-1023], 22947, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/18-13:28:23, [CONF-1023], 22962, FID 100, INFO, ISLART9999, configDownload failed for chassis.
2017/05/18-13:28:53, [CONF-1000], 22966, FID 100, INFO, ISLART9999, configDownload completed successfully for fid 100.
2017/05/18-13:33:53, [CONF-1023], 22982, FID 100, INFO, ISLART9999, configDownload failed for chassis.

 

 

Any tip ?

Brocade Moderator
Posts: 105
Registered: ‎04-27-2009

Re: Configdownload fails

Hi,

 

can you please supply all output from configdownload via CLI. Normally it will give you a reason why it fails.

 

TL

If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution".

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider.
Occasional Contributor
Posts: 19
Registered: ‎06-12-2015

Re: Configdownload fails

Hi Thomas

 

This is thwe full outoput

I see a warning for expired license, but this license had expired loong before the configupload was done

 

 
FID100:root> configdownload -all -p ftp ""
 
                         *** CAUTION ***
 
  This command is used to download a backed-up configuration
  for a specific switch.  If using a file  from a  different
  switch, this file's configuration  settings will  override
  any current switch settings.   Downloading a configuration
  file, which was uploaded  from a different type of switch,
  may cause this switch to fail.
 
  A switch reboot is required for the changes to take effect.
 
  Please make sure all the switches are disabled by
  using "chassisdisable" command. Downloading configuration
  to an online switch may result in some configuration not
  being downloaded to that switch.
 
 
 
  configDownload operation may take several minutes
  to complete for large files.
  Do you want to continue [y/n]: y
Process function of configdownload failed for filter "aaaconf"
duplicate license-key "ZJCFNMJJXAZCrBMT3DBBNMSgWPmaY7ZABStAR"
License Expired. No action taken.
:FID100:root> errdump


2017/05/18-12:54:34, [CONF-1023], 22931, FID 100, INFO, , configDownload failed for chassis.
:FID100:root>

 

Took ouput from licenseshow

 

licenseshow:
licenseshow :
ZJCFNMJJXAZCrBMT3DBBNMSgWPmaY7ZABStAR:
Fabric license
Extended Fabric license
Fabric Watch (Fabric Vision capable) license
Performance Monitor (Fabric Vision capable) license
Trunking license
Adaptive Networking - obsolete license
Enhanced Group Management license
8 Gig FC license

 

I see them removed the license when they got this error

Clishow

Thu May 18 11:56:50 2017         root, FID 100, 10.0.138.166, licenseremove YQQtLSDSXYLJ4YTFgHMmmTfK9KG7M3HKrEE3AErErWS77ANa7E

Brocade Moderator
Posts: 105
Registered: ‎04-27-2009

Re: Configdownload fails

Hi,

 

you don't need to care about the license messages, they are normal.

 

Your configdownload fails because "Process function of configdownload failed for filter "aaaconf"".

 

Was this switch replaced? Or is it still the same switch? Have seen this before after a replacement in the past.

 

You can try 2 options:

 

1. Delete all ldap/radius and authspec parameter lines in the config file manually and download again.

2. Set up your aaaconfig manually again prior to download the config.

 

I believe both options can solve your problem.

 

TL

If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution".

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider.
Occasional Contributor
Posts: 19
Registered: ‎06-12-2015

Re: Configdownload fails

Hi Thomas

 

Its the same switch

Configupload was done 2 days prior to the configdownload

 

I will try the steps provided

thanks for feedback

Occasional Contributor
Posts: 19
Registered: ‎06-12-2015

Re: Configdownload fails

Thomas

 

Option 1 solved the issue

Thanks for the tip Smiley Happy

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.