Fibre Channel (SAN)

Reply
Contributor
Posts: 66
Registered: ‎03-31-2013

BNA Trap forwarding

Dear Alll

Any ideas how to check or verify if SNMP Trap Forwarding is working or not in BNA 12.0

Can Someone help me with the MIB for BNA, which we would like ot upload to Spectrum Tool

Regards

Thrinath

Contributor
Posts: 57
Registered: ‎08-12-2009

Re: BNA Trap forwarding

Thrinath


There is no MIB for BNA. The MIB's you would load into Spectrum would be for the products you are managing with BNA. If you are managing SAN switches with FOS 6.4 you would load the FOS 6.4 MIB's into Spectrum.


If you have BNA configured as a trap forwarder they will forward the native switch trap with no modification. One method to confirm if this is working is to validate if there are any SNMP messages in the BNA master log, if so, these SNMP based events should be in the Spectrum receiver log.

Contributor
Posts: 66
Registered: ‎03-31-2013

Re: BNA Trap forwarding

Thank you for the reply

We have uploaded the MIBs of the products managed by BNA, even then the traps are not getting capture by spectrum,

Is there a way to check if BNA is forwarding traps or not. Trap forwarding option in BNA is enabled and configured with recepients.

Valued Contributor
Posts: 761
Registered: ‎06-11-2010

Re: BNA Trap forwarding

Hi,

I have always been a fan of wireshark to test this kind of things.

Occasional Contributor
Posts: 7
Registered: ‎04-13-2011

Re: BNA Trap forwarding

Mmm thats not a bad option

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

Download FREE NVMe eBook