03-04-2015 01:43 AM
Normally Brocade 7800 is used as FCIP but I would like to use it as a fabric switch between HP C7000 Blade Enclosure and storage arrays.
I would like to connect few ports on Brocade Blade switch directly to storage array and have few ports connected to Brocade 7800 as NPIV. ---------- Is this possible ?
Many Thanks in advance
03-04-2015 08:27 AM
Yes this work, however as fair as I remember, the First Quad Port Group "Port 0-3" when the port was changend from EX_Port to E_Port, NPIV with some FOS was not supported.
I believe this Restriction as be Solved / Removed in FOS 7.x