08-10-2012 07:35 AM
I got the following message cfrom 48k:
S5,C1:Internal monitoring of faults has identified suspect part, blade may need to reset or replace: fault1:12611 cdr-1010
S5,C1: HW ASIC chip warnong Level1 type =0x33
Someone can help me to undersyand this error?
08-10-2012 09:47 AM
Message <timestamp>, , <sequence-number>,, CRITICAL, <system-name>, S<slot
number>,C<chip index>: Internal monitoring of faults has identified suspect
hardware, blade may need to be reset or replaced: fault1:<fault1_cnt>,
Indicates above normal errors observed in hardware that may or may not impact data traffic.
Whenever this error is observed persistently, power cycle the specified blade. If the problem
persists, replace the blade.