This Script uses a list of switches or has a single switch name passed to it. It then talks to the switches and generates a report of any switch ports that are set to autonegotiate This is usefull as some storage vendors (HP i know for certain) recommend having all ports set to a fixed speed. You will need to change the line in the script that says to your switch admin password.
Operating System Tested on solaris but should work on any Unix.
Fabric Operating System Any
NOTES (INCLUDING LIMITATIONS)
NOTE: This contribution was migrated by Brocade from the former Brocade Connect community on March 13, 2008, on behalf of the author.