03-29-2016 06:45 AM
A bad zoning defined configuration has been download to the Fabric. What is the best way to update it ?
there is a good Backup which can be used to restore a switch (principal). But the switch will reboot with a different zoning
configuration and will segment ?
The Active configuration is OK.
03-30-2016 01:22 AM
I do not understand your Problem.
You say that the active configuration is ok, but there is a bad defined configuration?
Which firmwareversion do you have and please perform cfgtransshow
03-30-2016 07:17 AM
The problem is that during a Fabric merge the defined configuration contained 2 configurations . The second configuration was
added during the previous merge in July.
f_fr0_0a --> effective configuraiton
fr_iaas_10 --> included into f_fr0_0a, comming from a previous merge.
I merged a new ENG10 to f_fr0_0a
As i did not selected fr_iaas_10, f_fr0_0a selected the last configuration referenced for fr_iaas_10 from july !!!!!!!!!!
There is a big delta between the Defined configuration which include some bad and old zoning from july and
the effective configuration which has not been updated yet and is correct.
So i tried to use BNA using the effective configuration which is OK, to update the define. But i was able to save the effective
to a configuration file but unable to use the configuration file to merge or update the defined configuration....
What about cfgsave ? Can we force the Defined with the Effective data ?
Fabric OS: v6.4.3g
Made on: Tue Jan 20 19:23:27 2015
Flash: Tue Mar 15 10:46:09 2016