06-14-2016 05:41 AM - edited 06-14-2016 05:58 AM
I have been tasked with decommissioning our old storage platform. As part of this i need to remove the old SAN switches. Currently only FabricA of the old environment is linked to FabricA of the newer environment, this being via an ISL connection via port 11 on both switches (E-Port).
11 11 id 4G Online E-Port 10:00:00:05:1e:62:7e:ef "XXXX2SANSW01" (downstream)
Would i be right in thinking i would first have to remove the zoning from the newer environment and then disconnect the ISL link? Then power off the old switches?
Also here are currently 2 switches on FabricA on the old environment with SANSW01 being the principle, and 3 switches on FabricA on the newer environement, though all subordinates. Would i have to elect a new principle on the newer environment, if so, when? before or after the zoning deletion and ISL disconnected?
admin> fabricshow Switch ID Worldwide Name Enet IP Addr FC IP Addr Name
1: fffc01 10:00:00:05:1e:03:ff:55 10.20.1.221 0.0.0.0 >"xxxsansw01" (old environment)
3: fffc03 10:00:00:05:1e:07:8e:0c 10.20.1.223 0.0.0.0 "XXXSANSW03" (old environment)
7: fffc07 10:00:00:27:f8:0d:c5:52 192.168.196.111 0.0.0.0 "XXX2SANSW07 " (new environment)
11: fffc0b 10:00:00:05:1e:62:7e:ef 10.52.1.221 0.0.0.0 "XXX2SANSW01 " (new environment)
13: fffc0d 10:00:00:05:1e:5f:59:84 10.52.1.223 0.0.0.0 "XXX2SANSW03 " (new environment)
32: fffc20 10:00:00:05:33:74:67:77 10.52.1.225 0.0.0.0 "XXX2SANSW05 " (new environment)
The Fabric has 6 switches
06-14-2016 06:53 AM
-->>Would i be right in thinking i would first have to remove the zoning from the newer environment....
-->>The Fabric has 6 switches
a config is active fabric wide, no matter is the fabric is composed from new or old switches and you have to take attention by remove zone from a config.
->Also here are currently 2 switches on FabricA on the old environment with SANSW01 being the principle,
you cannot have in the same fabric 2 switch as principal
06-24-2016 02:59 AM
I think i may have been misunderstood.
As it stands, there are 2 switches in the old environent that we will be removing. SANSW01 and SANSW03. SANSW01 is currently the 'Principle' in the Fabric.
The old switches and new switches are connected via an ISL link on port 11 (E-Port) on old SANSW01 and New SANSW01. If i remove this link, would it force an election for a new 'Principle' on the 4 remaining new SAN switches, or would i have to force once of them to become a princple?