For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 7
Registered: ‎03-30-2017
Accepted Solution

performance data is not getting collected using "timeseriestxframerate" rest APIs in BNA 14.0.1

We have tried to run below mantioned Rest API call from DHCP Clint
i.e.
 "Https://<BNA_IP>/rest/resourcegroups/All/fcswitches/10:00:00:05:33:B7:75:D5/timeseriestxframerate?startdate=1493709003000&enddate=1493795403000"


o/p of the above comm. is blank :

{

"performanceDatas[],

]"granularity":"GRANULARITY_MINIMUM",

"duration":null,

"startDate":1493709003000,

"endDate":1493795403000

}

 

is there other way to collect switch frame time series performance data.??

 

Broadcom Moderator
Posts: 467
Registered: ‎03-29-2011

Re: performance data is not getting collected using "timeseriestxframerate" rest APIs in BNA 14.0.1

Hi,

 

look at the following post which covers the same query (?):

 

https://community.brocade.com/t5/Fibre-Channel-SAN/performance-data-is-not-getting-collected-using-quot/m-p/92258#U92258




If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution".


Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.