03-20-2011 11:07 PM
I am working on Brocade 200e switch(access gateway). I want to get all the F-ports of gateway through SMIS browser. Could you please guide me for getting all F-ports in the browser?
The SMIS browser that I am using is Ultimate CIM.
03-20-2011 11:24 PM
--->>>....is Ultimate CIM.
I developed at the moment a Applications to put san config into a external DB, and have tested at several time Ultimate CIM, w/o success.
03-20-2011 11:31 PM
We want to discover F ports of Brocade Access Gateway, we are able to discover Gateway as a Brocade_Platform instance.
Even the SMIS agent developers guide doesnt mention anything about F ports.
Any help on getting Fports through SMI-s would be helpful.
03-21-2011 02:46 AM
yaa ,but I have made following changes in normal setup:-
I have added agent on which SMIS is installed and is pointing to edge switch.
From edge switch we are getting access gateway as Brocade_Platform in Ultimate CIM.
Now I have to get F ports in SMIS browser and only by using SMIS not by polling via SNMP.
03-21-2011 06:20 AM
Ok I wish you the best in making that happen, i don't think its going to work.
Are you getting more info other then Brocade__Platform Access Gateway?
The reason why I don't think is because http://www.brocade.com/downloads/documents/data_sheets/product_data_sheets/AccessGateway_200E_DS_01.pdf (usage notes on the bottom) tells me it won't work as does the course ware.
But it would be interessting if you can make it work anyway...please report back when you succeed.
04-27-2011 02:16 PM
Hope all is well! I wanted to follow up and see if you were able to get your issue resolved. Please keep us updated.
Global Community Moderator