07-17-2018 07:11 AM - edited 07-17-2018 07:15 AM
I was replacing the the EMC branded brocade SAN switch with another IBM branded brocade SAN switch, I took configuration backup of old(EMC) switch and was trying to download the configuration file on the new(IBM) switch.
While downloading the configuration I am getting below error.
*** CAUTION ***
This command is used to download a backed-up configuration
for a specific switch. If using a file from a different
switch, this file's configuration settings will override
any current switch settings. Downloading a configuration
file, which was uploaded from a different type of switch,
may cause this switch to fail.
A switch reboot is required for the changes to take effect.
Please make sure all the switches are disabled by
using "chassisdisable" command. Downloading configuration
to an online switch may result in some configuration not
being downloaded to that switch.
configDownload operation may take several minutes
to complete for large files.
Do you want to continue [y/n]: y
Error: This is not a chassis level config file.