Will an embedded Qlogic module in an IBM BladeCenter work/communicate with a Brocade 2800 switch? The target devices are behind the silkworm switch. The Silkworm 2800 is runnig FOS 2.6.1c. Its enabled features are:
you should check with ibm support matrix for details (driver/firmware version and so on)generally speaking it should work, i think
Thanks again for your help
We have contacted IBM & we were told to upgrade the firmware on IBM F16 (Brocade switches) to 3.2.0-Murali
There is no 3.x release of Fabric OS for the 2800... <!graemlin::D>
I am not sure FS 3.x release for SilkWorm 2800.
Get quick and easy access to valuable resources across the Broadcom Community Network.