07-14-2006 07:19 AM
Hi ibm2109,So i understand the other Switch work Fine, and the Cable is OK. Is possible to replace the SFP from they Switch that create the Error ? Is this Error in the same Port or of all Port these Switch ? Have here any Free unused Port to test is the Error longer apperar or no ?
07-14-2006 07:31 AM
Actually, I unplug the cable connected to one HBA on a host server (two HBAs installed on this server),and then plug in. Then I unplug the cable connected to another HBA and then plug.Any hints?
07-14-2006 07:51 AM
Hi ibm2109,FW-1436 is for WARNING example Sync error ( this because FW-1425, also Normal ) but that can be caused by CRC Error or Other serios Problem whit the switch. they find all this Error listed in the Systems Error Message Reference Manual, Pubblication 53-0000515-11
07-14-2006 10:25 AM
Hi ibm2109,I say im my Message Posted Thu July 13 2006 10:50 AM and in the Message Posted Fri July 14 2006 07:51 AM, they have a serios Problem. I assume that this One Port self in the Switch is damaged, but i have another Idee to make sure you can reset the switch to Factory Default, delete all errlog. Before you reset the Switch to Factory Default save the Config and the License from the switch.