For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 17
Registered: ‎09-08-2007

What is the problem?

a silkworm 3252 have some problem:

The system is coming up, please wait...

Checking system RAM - press any key to stop test

00c00000

System RAM check terminated by keyboard

System RAM check complete

Press escape within 4 seconds to enter boot interface.

Booting "Fabric Operating System" image.

MEM()0xF0000000 has an invalid magic number (0x01600003)

Booting "Fabric Operating System" image.

MEM()0xF0800000 has an invalid magic number (0xFFFFFFFF)

?

External Moderator
Posts: 5,471
Registered: ‎02-23-2004

Re: What is the problem?

suziang,

the problem is a Corrupted CF = Compact Flash, or missing Boot Point.

See this threads, and good luck.

http://community.brocade.com/home/message/4839#4839

TechHelp24

TechHelp24
Occasional Contributor
Posts: 17
Registered: ‎09-08-2007

Re: What is the problem?

Ths. I will try.......

Occasional Contributor
Posts: 17
Registered: ‎09-08-2007

Re: What is the problem?

> printenv

AutoLoad=yes

ENET_MAC=00051e34c1d7

LoadIdentifiers=Fabric Operating System;Fabric Operating System

OSBooted=MEM()

OSLoadOptions=quiet;quiet

OSLoader=MEM()0xF0000000;MEM()0xFFFF80000

OSRootPartition=hda1;hda2

SkipWatchdog=yes

but reset the switch:

The system is coming up, please wait...

Press escape within 4 seconds to enter boot interface.

Booting "Fabric Operating System" image.

MEM()0xF0000000 has an invalid magic number (0x01600003)

Booting "Fabric Operating System" image.

MEM()0xfff80000 has an invalid magic number (0x426F6F74)

?

External Moderator
Posts: 5,471
Registered: ‎02-23-2004

Re: What is the problem?

suziang,

do you have edited bevore the OSLoader ?

i note this line, --->>> OSLoader=MEM()0xF0000000;MEM()0xFFFF80000

this is very suspect, i note here a "F" to much, and casually have the Loader 8 Characters example 0x12345678

the image boot from the MEM Address MEM()0xfff80000

--->>> MEM()0xfff80000 has an invalid magic number (0x426F6F74)

The boot Block/Loader is very complex, each switch Type have another Boot Order.

do you have another 352x switch ? is yes, boot withj the serial cable, and see the Loader option.

TechHelp24
External Moderator
Posts: 5,471
Registered: ‎02-23-2004

Re: What is the problem?

suziang,

do you have edited bevore the OSLoader ?

i note this line, --->>> OSLoader=MEM()0xF0000000;MEM()0xFFFF80000

this is very suspect, i note here a "F" to much, and casually have the Loader 8 Characters example 0x12345678

the image boot from the MEM Address MEM()0xfff80000

--->>> MEM()0xfff80000 has an invalid magic number (0x426F6F74)

The boot Block/Loader is very complex, each switch Type have another Boot Order.

do you have another 352x switch ? is yes, boot withj the serial cable, and see the Loader option.

TechHelp24

TechHelp24

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.